AIM RPM Bridge Timing Designed to be mounted directly

Designed to be mounted directly to the vehicle spindle or hub carrier

such as the MyChron3

accelerations) and RPM's are displayed at once

RGB LEDs border the easy to read screen

Connects to the Strada using a 12-pin AMP connector

AIM RPM Bridge Timing Designed to be mounted directlyThe AIM RPM Bridge is designed to be used with the AIM SmartyCam Video Recorder Data Logger to allow a vehicle's RPM overlay on the SmartyCam video. The RPM Bridge is necessary on cars that do not have an AIM compatible ECU (such as classic cars). RPM Data is received through a simple connection to the vehicle's coil. The RPM signal can be received in two ways: Direct from the ECU through a square wave signal (from 4 to 50V) From a coil low voltage