COMP Cams Magnum Roller Tip Steel Rocker Arm Kit w/ High Energy Pushrods - 3/8 in Stud Mount - 1.60 Ratio - Oldsmobile V8 1441-KIT AN Fitting Wrench This kit was developed for

This kit was developed for the 604 crate engine but can also work with many other standard SBC applications with heads that have provisions for auxiliary 3-bolt mounting

If your Hedman Hedders have this style of collector they do not require a gasket

Upper mount must be cut into two pieces (LH/RH) and trimmed to desired height depending upon where housing is located in the chassis

RE Suspension Bump Rubbers are used to control abrupt chassis movements for more stability

Wiseco Forged Piston Sets

COMP Cams Magnum Roller Tip Steel Rocker Arm Kit w/ High Energy Pushrods - 3/8 in Stud Mount - 1.60 Ratio - Oldsmobile V8 1441-KIT AN Fitting Wrench This kit was developed forComp Cams Magnum Roller Tip Steel Rocker Arm Kit w High Energy Pushrods 3 8 in Stud Mount 1. 60 Ratio Oldsmobile V8 Perfect for street performance Olds 350 403 our 8620 chromemoly steel 1. 6 ratio Magnum roller tip rockers can handle up to 350 lbs of pressure. Included in the kit are studs, guide plates and a set of our High Energy pushrods. COMP Cams Magnum Roller Rocker Arm Kit, 1. 6 ratio, 3 8" Stud Diameter for Oldsmobile 350 and 403c. i. V8